Windhager FireWIN - Page 30

30
2. Operation
1 Only displayed if a feed system is present and if this has been adjusted by a trained
service technician in the service level.
2 only displayed when an MESplus control is present and this has been adjusted by a
trained service technician in the basic settings.
5s
RESET
Fig. 74
Boiler temperature
(Operating phases)
Lighting ON
42
°C
42
°C
5s
RESET
Fig. 75
Boiler temperature
(Operating phases)
Info Menu
42
°C
42
°C
5s
RESET
Fig. 76
Operator level
Service level
Information level
MES Module
2
Choose Back
5s
RESET
Fig. 77
Boiler cleaning
Time
Feed operating mode
Time profile feed
Probe switching
Time profile ash compression
Choose Back
2.8.1.3 Setting the feed operating mode
1
This menu item sets:
– whether the feed is switched off, or
– whether the feed should fill the pellet boiler with or wit-
hout time control.
Pressing one of the six buttons switches the lighting and
display on – Fig. 74.
Press the Menu button – Fig. 75.
Confirm the selected menu item “Operator level” by pressing
the Choose button – Fig. 76.
The arrow buttons select the “Feed operating mode” sub-
menu – Fig. 77.