Confirm the selected “probe switching” sub-menu by pres-
sing the Choose button – Fig. 103.
The arrow buttons select the probe switching (for options,
see table on page 36) – Fig.104.
Pressing the Save button saves the changed probe swit-
ching – Fig. 105.
The display shows “Parameter is saved” for a few seconds
(Fig. 106) and then changes back to the previous level –
Fig.107.
The menu item or sub-menu item is exited by pressing the
Back button (Fig. 107) or after a delay of 45 seconds.
To Next Page
Loading...
