Maintenance
3301−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
1/ 1
Key to Illustrations:
1 Engine longitudinal beam
2 Crank web
3 Step
4 Strap
Tools:
2 Working platforms, 94142
consisting of 2 grids each
2 Working supports 94143
To avoid accidents, the grids of working platform 94142 and working supports
94143 should be used for inspections or work in the crankcase. The grids must
always be fitted in such a way that their U-profiles come to lie between engine lon-
gitudinal beam 1 and that the opposite end rests on crank web 2.
Working support 94143 can be fitted between the columns at the desired height,
on steps 3. These are safeguarded against falling down by shoving straps 4
against the steps.
Attention! Never rotate the crankshaft while the grids or working supports are in
position.
94142
1
94142
94143
1
3
2
I
I
I - I
A
003.462/00
94143 4
3
FUEL SIDE
2010
Crankcase
Utilization of Working Platform
To Next Page
Loading...
Need help?
General
