WinGD WARTSILA RT-flex58T-D User Manual

Maintenance
Group5
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
1/ 3
o Supply Unit
− Removal and Fitting of Servo Oil Pump and Servo Oil Pump Drive 5552−1/A1.........
− Removal and Fitting of Camshaft and Bearing Shells 5552−2/A1.....................
− Removing and Fitting the Gear Wheel on Camshaft 5552−3/A1......................
− Removal and Fitting 5552−4/A1..................................................
− Lubrication of Supply Unit During Maintenance Works 5552−5/A1....................
Fuel Pump: Dismantling and Assembling 5556−1/A1..................................
Fuel Pressure Control Valve: Removal, Fitting, Dismantling and Assembling 5562−1/A1....
Fuel Overpressure Safety Valve: Checking and Setting 5562−2/A1......................
Injection Control Unit: Removal and Fitting 5564−1/A1.................................
Pressure Reducing Valve 8.11−1: Checking the Gas Pre-charge Pressure 5610−1/A1.....
Exhaust Valve Control Unit:
Removal, Fitting, Dismantling and Assembling 5612−1/A1..............................
o Regulating Linkage
− Adjusting: with Heinzmann StG 10-01 Actuator 5801−1/A1..........................
− Adjusting
: with Woodward ProAct II − Digital Actuator 5801−1/A2....................
Su
pp
l
y
Unit
,
In
j
ection and Exhaust Valve Control Grou
p
5
Winterthur Gas & Diesel Ltd. RT−flex58T−D / V2 / MM / 2018−02

WinGD WARTSILA RT-flex58T-D Specifications

General

Brand	WinGD
Model	WARTSILA RT-flex58T-D
Category	Engine
Language	English