Maintenance
6420−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
1/ 3
Key to Illustrations:
1 Hinged cover 8 Stop plate
2 Scavenge air receiver 9 Relief valve
3 Door 10 Water drainage piping
4 Inspection cover 11 Screw
5 Fixed support (suction space) 12 Distance ring
6 Auxiliary blower 13 Inspection cover
7 Air flap 14 Cover
1. Inspection of air flaps
Air flaps 7 arranged in the scavenge air receiver and in fixed support 5 must be
checked for damage, movability as well as fouling, in the course of the periodic
cleaning of the scavenge air receiver (see 0380−1).
The air flaps in the receiver are reached through openings on the front sides of the
scavenge air receiver, by loosening doors 3 and folding them back laterally.
To check the air flaps for auxiliary blowers 6, both inspection covers 4 at fixed sup-
port 5 are to be opened.
A
I
6
3
2
1
7
9
13
4
3
5
4
7
WCH01063
Scavenge Air Receiver
Checking the Air Flaps and Cleaning the Scavenge Air Receiver
2013-02
To Next Page
Loading...
