Maintenance
2708−1/A1
RT-flex58T-D
Winterthur Gas & Diesel Ltd.
1/ 3
Tools: Key to Illustrations:
1 Suspension device GF 94265 1 Cylinder cover 8 Pad
2 Exhaust valve cage 9 Pipe
3 Cylinder liner 10−12 O-rings
4 Joint ring
5 Upper water guide jacket RC Eye bolt
6 Lower water guide jacket TH Threaded hole
7 Allen screw WU Wooden underlay
1. General
Risk of accident! The cylinder cover may be lifted or transported with tool
GF 94265 and eye bolt ’RC’ which is part of the exhaust valve as shown in Fig. ’A’
and ’B’.
Attention! Wooden underlays ’WU’ placed on the upper platform are pro-
vided for cylinder cover overhauling. However, they may be used at port
only, and in no case this may serve as storage place during the voyage!
Moreover, always bear in mind, that the passage between engine and cylinder
cover is limited (e.g. as possible escape route) on the platform.
A
B
GF 94265
2
5
RC
1
WCH01037
WU
Cylinder Cover
Removal and Fitting of Cylinder Cover and Water Guide Jacket
V2 / 2013-02
V”
To Next Page
Loading...
