Rugged Windows Tablet PC M101BK
I cannot project the tablet
computer display to another
monitor.
Make sure the VGA driver is installed.
Make sure the output setting selected is correct.
Barcode scanner does not
emit laser beam and does not
seem to work.
Make sure the Barcode scanner device is enabled in Winset
utility.
Make sure under Windows, the Barcode Reader is set to COM
15 port, so that Winset can trigger the Barcode Reader
hardware.
Barcode Scanner emits laser
beam but does not read
barcode presented to it.
Adjust the distance between barcode scanner of the device
and the barcode being scanned.
Make sure the barcode code type is enabled in the tablet. To
enable/disable a specific barcode code type, go through the
“Barcode Scanner Configuration” section.
I am having GPS accuracy
issue
When utilizing the GPS function, we recommend disabling the
Barcode Reader in Winset to reduce interference.
RFID scanner does not seem
to work.
Make sure under Windows, the RFID hardware is set to COM
3 port.
Battery leaking or swollen
The lithium battery used in this tablet may swell after being
charged/ discharged many times, but there is no problem
regarding safety.
Continued use in such a state may result in the battery getting
jammed, so please stop using the battery, and purchase a new
one.
To Next Page
Loading...
