1128500 WPC 2000 User Manual
I-4 Index
settings key switch
installing and wiring (display board kit)
,2-57
location and function,1-5
shields (cable), terminating,2-5
single-stroke mode
operating the press in automatic single-
stroke
,4-16
operating the press in single-stroke foot,4-15
operating the press in single-stroke one-
hand
,4-12
operating the press in single-stroke two-
hand
,4-11
operating the press with a one-hand control,4-13
testing with light curtain(s),3-45
testing without light curtain(s),3-47
specifications,1-8
start time
fault (loss of rotation)
,5-18
initializing the start-time limit,3-4, 3-5
viewing the start-time limit,3-5
stop time
allowance for brake wear (Tbm)
,3-15
calculating the stop-time limit,3-15
determining stop time at 90° (continuous),3-17
determining stop time at 90° (single-stroke),3-18
determining stop time at top-stop,3-14
enabling changes to stop-time limit,3-29
initializing stop-time limit,3-4
setting stop-time limit,3-16
stop time exceeded fault,5-4
stopping time
using in ANSI safety distance formula
,3-21
using in OSHA safety distance formula,3-23
stroke select key switch
installing and wiring (display board kit)
,2-58
installing and wiring (panel mount),2-55
location and function,1-1
suppressor, installing across an AC load,2-40
system static test,3-43
–T–
tests
checkout
,3-35
installation verification,2-58
ninety degree (90°) stop time,3-17
top-stop "on" angle
adjusting
,3-11
determining,3-6
setting,3-6, 3-26
top-stop button (operator station)
location
,1-3
testing top-stop circuit,3-40
top-stop bypass, operating the press in,4-9
top-stop in inch
disabling
,2-35
operating the press in,4-9
top-stop mode for F and H errors, setting,3-30
two-hand mode
operating the press in continuous two-hand
,4-17
operating the press in single-stroke two-
hand
,4-11
–U–
user inputs
testing
,3-58
wiring,2-28
–W–
wiring connections
automatic single-stroke
,2-48
auxiliary e-stop relay board,2-63
auxiliary outputs,2-31
bar control,2-47
cam output assembly, 2-38, 2-63
display board,2-63
DSV/lockout relay board, 2-30, 2-63
foot switch,2-42
main processor board (TB101-TB104),2-62
micro-inch,2-34
mute lamp,2-58
one-hand control,2-46
overrun sensor switch,2-27
power (TB105),2-63
remote reset switch,2-35
reset button,2-58
resolver (TB106),2-63
selector switches,2-55
settings key switch,2-58
user inputs, 2-29, 5-13
zero cam,2-42
–Z–
zero cam, wiring output to AutoSet,2-42
To Next Page
Loading...
