public 5
om_yxm_installation.fm document release 1.1 last updated 30/9/15
Installing the YOXIMO
You can call upon a technician or a field engineer to help you install your terminal or you can do it
yourself. If you decide to install the terminal yourself, remember the guidelines below.
• if you decide to install the YOXIMO yourself, Worldline nor its vendor will bear any
responsibility or cost for malfunctioning, breakdowns or any anomaly that may result from
incorrect manipulation of the terminal
• read the safety recommendations on page 48 before starting to install your YOXIMO.
• if you notice that any part of the YOXIMO does not fit, blocks or shows any other malfunction,
contact your vendor – do not try yourself to repair or alter it in any way.
• use only accessories (battery, power adaptor, cables and so on) provided by your vendor or
by an approved source
Unpacking the terminal
1. Open the package and check the contents.
The package should contain a YOXIMO terminal, a battery, a mains adaptor and a roll of
paper for the printer. If any of these is missing, contact your vendor immediately.
Your vendor may also have included documentation.
2. Inspect the package and its contents for damage.
If anything is missing or damaged, contact your shipping company immediately and notify
your vendor.
Save the box for repacking or moving your equipment in the future.
To Next Page
Loading...
