Worldline YOXIMO - Maintaining the YOXIMO; Cleaning the terminal; Cleaning the card reader; Cleaning the cradle

public 35
om_yxm_maintenance.fm document release 1.1 last updated 30/9/15
Maintaining the YOXIMO
For optimal functioning of the YOXIMO terminal and cradle, clean them regularly.
• do not immerse the products in water, or use a lot of water while cleaning
• do not let dirt enter the card readers
• do not use detergents, solvents, alcohol or abrasive products
These products may damage surfaces and make transparent parts opaque
Cleaning the terminal
1. Disconnect the power adaptor from your YOXIMO terminal or remove the terminal from its
cradle.
2. Remove the battery.
3. Clean the display, the keypad and the terminal housing with a soft damp cloth.
Cleaning the card reader
Clean the card readers for chip cards and magstripe cards with a cleaning card, following the
instructions in the cleaning-card kit.
We suggest cleaning the card readers every two weeks. Contact your vendor for additional
information about cleaning cards.
Cleaning the cradle
1. Disconnect the power adaptor from the cradle.
2. Clean the cradle with a soft damp cloth.
Cleaning the carrying case
Clean the carrying case with a soft damp cloth.
!