YOXIMO owner manual
28 public
last updated 30/9/15 document release 1.1 om_yxm_accessories.fm
Unpacking the cradle
1. Open the YOXIMO cradle package and check the contents.
The package should contain at least a YOXIMO cradle, a drop protection and two
mounting screws
If any of these is missing, contact your vendor immediately.
2. Inspect the package and its contents for damage.
If anything appears damaged, contact your shipping company immediately and notify
your vendor.
Save the box for repacking or moving your equipment in the future.
Selecting a location for the cradle
Select a convenient location for the YOXIMO cradle, where you can comfortably put the terminal
aside temporarily, charge the battery and possibly operate the terminal.You can install the cradle
on a countertop (horizontal) or on a wall or other vertical surface.
• avoid direct light sources as they can interfere with the readability of the display or the keypad
• make sure that the cables are not hindering you or your customer. always guide cables
through a strain relief
• circulation of air around the YOXIMO is not obstructed. if the YOXIMO terminal is not
freestanding, provide adequate ventilation.
• for quick and efficient results, charging should be performed between 0°C and 40°C
The cradle can also be installed in a vehicle.
• only qualified personnel should install the YOXIMO in a vehicle – faulty installation may
invalidate any warranty that applies to the unit
• do not attach the cradle to the floor of the vehicle, as vibrations and dust may disrupt its
operation
To Next Page
Loading...
