public 39
om_yxm_safety.fm document release 1.1 last updated 30/9/15
YOXIMO owner manual
• Impact, friction, temperature, humidity, light, and oil affect the coloring and storage
characteristic of thermal printer paper. Only load paper rolls that do not have folds, wrinkles,
tears, or holes. Do not pull paper out of the printer; this could damage the feed mechanism.
Only use Worldline-approved paper.
Opening the terminal
•
Only open the YOXIMO terminal for adjustments that are described in this manual. Never
remove or open any part that is not described in this manual.
• When opening the YOXIMO terminal take the necessary precautions to avoid electrostatic
discharge (ESD). An electrostatic charge can build up on the human body and then be
discharged when you touch a circuit board. ESD can damage equipment and impair electrical
circuitry. To minimize the risk, always follow these guidelines when removing and replacing
SAM or SIM cards:
– Ground yourself while holding the YOXIMO and touching a metal surface on the
ground.
For example, if your computer has a metal case and is plugged into a standard
grounded outlet, then touching the case should discharge the ESD on your body
– Make sure not to wear any clothing that conducts a lot of electrical charge, such as
a woollen sweater
– Unless absolutely necessary, try not to work on the YOXIMO during a thunderstorm
– Remove all jewellery
Never open the cradle.
Servicing
All servicing other than the actions described in this manual must by performed by Worldline or an
approved service centre.
Disposing of the terminal and battery
When your YOXIMO is at the end of its life, return it to your vendor for disposal. The terminal
contains materials that have to be disposed of professionally.
Do not throw batteries away with the household waste: use an appropriate recycling channel or
return them to your vendor.
To Next Page
Loading...
