wsm L503 - Check Points of Every 400 Hours; Check Points of Every 600 Hours; Check Points of Every 800 Hours

G-31
L3130 · L3430 · L3830 · L4630 · L5030, WSM
G GENERAL
Checking Air Conditioner Condenser (Cabin Model)
1. Check the air conditioner condenser (1).
2. If dust and dirt, wash off all dirt and dust from the condenser (1)
with a soft brush, use care not to damage or bend the fins.
W1019699
[6] CHECK POINTS OF EVERY 400 HOURS
Changing Transmission Fluid
1. See page G-17.
W10365120
Changing Front Axle Case Oil
1. See page G-18.
W10365590
Replacing Fuel Filter Element
1. See page G-23.
W1085936
[7] CHECK POINTS OF EVERY 600 HOURS
Adjust Front Axle Pivot
1. Loosen the lock nut (2), tighten the adjusting screw (1) all the
way, and then loosen the adjusting screw (1) by 1/6 turn.
2. Retighten the lock nut (2).
NOTE■
• If the axle pivot pin adjustment is not correct, front wheel
vibration can occur causing vibration in the steering wheel.
(Reference)
W1036668
[8] CHECK POINTS OF EVERY 800 HOURS
Checking Valve Clearance
1. See page 1-S27.
W1036805
(1) Air Conditioner Condenser
Tightening torque
Front axle adjusting screw
19.6 to 29.4 N·m
2.0 to 3.0 kgf·m
14.5 to 21.7 ft-lbs
Lock nut
98.1 to 147.1 N·m
10.0 to 15.0 kgf·m
72.3 to 108.5 ft-lbs
(1) Adjusting Screw (2) Lock Nut
KiSC issued 02, 2007 A