wsm L503 - Checking, Disassembling and Servicing; Separating Engine from Tractor

1-S12
L3130 · L3430 · L3830 · L4630 · L5030, WSM
ENGINE
4. CHECKING, DISASSEMBLING AND SERVICING
[1] SEPARATING ENGINE FROM TRACTOR
Draining Engine Oil
1. Start and warm up the engine for approx. 5 minutes.
2. Place an oil pan underneath the engine.
3. Remove the drain plugs (1) to drain oil.
4. Screw in the drain plugs (1).
(When refilling)
• Fill the engine oil up to the upper line on the dipstick (2).
IMPORTANT■
• Never mix two different type of oil.
• Use the proper SAE Engine Oil according to ambient
temperature.
Refer to “LUBRICANTS, FUEL AND COOLANT”. (See page
G-7, 8.)
W1013940
Engine oil capacity
L3130
L3430
5.7 L
6.0 U.S.qts
5.0 Imp.qts
L3830
6.7 L
7.1 U.S.qts
5.9 Imp.qts
L4630
L5030
8.2 L
8.7 U.S.qts
7.2 Imp.qts
(1) Drain Plug
(2) Dipstick
(3) Oil Inlet Plug
(A) L3130, L3430, L4630, L5030
(B) L3830
(C) Oil level is acceptable within this
range.
KiSC issued 02, 2007 A