wsm L503 - 2 Servicing Specifications

6-S2
L3130 · L3430 · L3830 · L4630 · L5030, WSM
FRONT AXLE
2. SERVICING SPECIFICATIONS
W10109890
Item Factory Specification Allowable Limit
Front Wheel Alignment Toe-in 2 to 8 mm
0.08 to 0.32 in.
–
Front Wheel Steering Angle
(L3130, L3430,
L3830 and L4630)
(L5030)
Axial Sway
Radial Sway
0.925 to 0.960 rad
53 to 55 °
0.733 to 0.768 rad
42 to 44 °
5.0 mm
0.196 in.
5.0 mm
0.197 in.
–
–
–
–
(for L3130, L3430, L3830 and L4630)
Differential Case, Differential Case Cover
to Differential Side Gear
Differential Case
Differential Case Cover
Differential Side Gear
Clearance
I.D.
I.D.
O.D.
0.050 to 0.151 mm
0.00197 to 0.00597 in.
32.000 to 32.062 mm
1.25984 to 1.26228 in.
32.000 to 32.025 mm
1.25984 to 1.26083 in.
31.911 to 31.950 mm
1.25634 to 1.25789 in.
0.20 mm
0.0079 in.
–
–
–
(for L5030)
Differential Case, Differential Case Cover
to Differential Side Gear
Differential Case
Differential Case Cover
Differential Side Gear
Clearance
I.D.
I.D.
O.D.
0.050 to 0.114 mm
0.00197 to 0.00449 in.
32.000 to 32.025 mm
1.25984 to 1.26083 in.
32.000 to 32.025 mm
1.25984 to 1.26083 in.
31.911 to 31.950 mm
1.25634 to 1.25789 in.
0.20 mm
0.0079 in.
–
–
–
Pinion Shaft to Differential Pinion
Pinion Shaft
Differential Pinion
Clearance
O.D.
I.D.
0.064 to 0.100 mm
0.00252 to 0.00394 in.
13.950 to 13.968 mm
0.54921 to 0.54992 in.
14.032 to 14.050 mm
0.55244 to 0.55315 in.
0.25 mm
0.0096 in.
–
–
Differential Pinion to Differential Side Gear Backlash 0.2 to 0.3 mm
0.008 to 0.012 in.
0.4 mm
0.016 in.
Spiral Bevel Pinion Shaft Turning Torque 0.98 to 1.18 N·m
0.10 to 0.12 kgf·m
0.72 to 0.87 ft-lbs
–
KiSC issued 02, 2007 A