9-S55
L3130 · L3430 · L3830 · L4630 · L5030, WSM
ELECTRICAL SYSTEM
Cruise Switch Continuity
1. Disconnect the connector (1) from the cruise switch after turning
the main switch OFF.
2. Measure the resistance across the two terminals.
3. If infinity is not indicated, the switch is faulty.
W1075997
Cruise Switch Panel and Wiring Harness
1. Disconnect the connector from the cruise switch after turning the
main switch OFF.
2. Turn the main switch ON and connect a jumper lead between the
connector terminals of wiring harness.
3. If the cruise indicator lamp does not light, the panel circuit or
wiring harness is faulty.
W1076155
Resistance (Across
switch terminals)
In normal state Infinity
(1) Cruise Switch Connector
(1) Connector of Cruise Switch (2) Connector of Wiring Harness
To Next Page
