G-40
L3130 · L3430 · L3830 · L4630 · L5030, WSM
G GENERAL
Oil Pressure Tester
Code No.: 07916-32032
Application: Use to measure lubricating oil pressure.
W10243180
Valve Seat Cutter
Code No.: 07909-33102
Application: Use to reseat valves.
Angle: 0.785 rad (45°)
0.262 rad (15°)
Diameter: 28.6 mm (1.126 in.) 38.0 mm (1.496 in.)
31.6 mm (1.244 in.) 41.3 mm (1.626 in.)
35.0 mm (1.378 in.) 50.8 mm (2.000 in.)
W10244580
Radiator Tester
Code No.: 07909-31551
Application: Use to check of radiator cap pressure, and leaks from
cooling system.
Remarks: Adapter (1) BANZAI Code No. RCT-2A-30S
W10245320
Connecting Rod Alignment Tool
Code No.: 07909-31661
Application: Use to check the connecting rod alignment.
Applicable: Connecting rod big end I.D.
range 30 to 75 mm (1.18 to 2.95 in.) dia.
Connecting rod length
65 to 300 mm (2.56 to 11.81 in.)
W10245830
Nozzle Tester
Code No.: 07909-31361
Application: Use to check the fuel injection pressure and spray
pattern of nozzle.
Measuring: 0 to 50 MPa
range (0 to 500 kgf/cm
2
, 0 to 7000 psi)
W10246530
(1) Gauge
(2) Cable
(3) Threaded Joint
(4) Adaptor 1
(5) Adaptor 2
(6) Adaptor 3
(7) Adaptor 4
(8) Adaptor 5
To Next Page
Loading...
