Multi 9310 Operation
ba75937e03 12/2011 21
Changing the
password
If the administrator has set up the access with password protection:
Forgotten the
password?
Contact the administrator.
The login is done immediately if no password is required. If a
sensor is connected the measured value display appears.
4. If a password is required:
Using <S
SS
S><T
TT
T>, select the menu item, Password and confirm with
<ENTER>.
The user specifies the password when he or she first logs in with a
user name.
A valid password consists of 4 digits.
The user can change the password with the next login.
5. Change the digit of the highlighted position with <S
SS
S><T
TT
T>.
Go to the next digit of the password with <F2>/[X].
When the password was completely entered, confirm with <ENTER>.
The login takes place. If a sensor is connected the measured value dis-
play appears.
1. Switch the meter on with <On/Off>.
The Login dialog appears.
2. Using <S
SS
S><T
TT
T>, select the menu item, User name and confirm with
<ENTER>.
The user name is highlighted.
3. Using <S
SS
S><T
TT
T>, select a user name and confirm with <ENTER>.
4. Using <S
SS
S><T
TT
T>, select the menu item, Change password and confirm
with <ENTER>.
5. In the Password field, enter the old password with <S
SS
S><T
TT
T> and <F2>/
[X] and confirm it with <ENTER>.
6. In the New password field, enter the new password with <S
SS
S><T
TT
T> and
<F2>/[X] and confirm it with <ENTER>.
The password is changed.
The login takes place. If a sensor is connected the measured value dis-
play appears.
To Next Page
Loading...
