wtw Multi 9310 - Page 69

Multi 9310 Settings
ba75937e03 12/2011 69
Setting menu of
LR325/01
Temp. comp. (TC) /
Linear coeff.
0.000 ...
2.000 ...
3.000 %/K
Coefficient of the linear temperature
compensation.
This menu item is only available when
the linear temperature compensation
is set.
Temp. comp. (TC) /
Reference temp.
20 °C
25 °C
Reference temperature
This setting is only available for the
measured parameters,
ϰ and ρ.
TDS factor 0.40 ...
1.00
Factor for TDS value
Reset - Resets all sensor settings to the deliv-
ery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET-
TINGS, page 72).
Menu item Possible
setting
Description
Menu item Possible
setting
Description
Cell constant 0.090 ... ...
0.100 ...
0.110 cm
-1
Display and setting options for the
cell constant
Temp. comp. (TC) /
Method
nLF
Lin
off
Procedure for temperature compen-
sation (see section 8.2 T
EMPERA-
TURE COMPENSATION, page 58).
This setting is only available for the
measured parameters,
ϰ and ρ.
Temp. comp. (TC) /
Linear coeff.
0.000 ...
2.000 ...
3.000 %/K
Coefficient of the linear temperature
compensation.
This menu item is only available
when the linear temperature com-
pensation is set.
Temp. comp. (TC) /
Reference temp.
20 °C
25 °C
Reference temperature
This setting is only available for the
measured parameters,
ϰ and ρ.
TDS factor 0.40 ... 1.00 Factor for TDS value
Reset - Resets all sensor settings to the
delivery condition (see section 9.6.1
R
ESETTING THE MEASUREMENT SET-
TINGS, page 72).