Supported Paper
Your printer is designed to use various paper and other media types. To ensure the best print quality and to avoid
jams, follow the guidelines in this section.
For best results, use Xerox paper and media recommended for your printer.
RECOMMENDED MEDIA
A list of paper and media recommended for your printer is available at:
• www.xerox.com/rmlna Recommended Media List (United States)
• www.xerox.com/rmleu Recommended Media List (Europe)
ORDERING PAPER
To order paper, transparencies, or other media, contact your local reseller or go to www.xerox.com/office/supplies.
GENERAL PAPER LOADING GUIDELINES
• Do not overfill the paper trays. Do not load paper above the maximum fill line in the tray.
• Adjust the paper guides to fit the paper size.
• Fan paper before loading it in the paper tray.
• If excessive jams occur, use paper or other approved media from a new package.
• Use only recommended Xerox
®
transparencies. Print quality could vary with other transparencies.
• Do not print on label media once a label has been removed from a sheet.
• Use only paper envelopes. Print envelopes 1-sided only.
PAPER THAT CAN DAMAGE YOUR PRINTER
Some paper and other media types can cause poor output quality, increased paper jams, or damage your printer.
Do not use the following:
• Rough or porous paper
• Inkjet paper
• Non-laser glossy or coated paper
• Paper that has been photocopied
• Paper that has been folded or wrinkled
• Paper with cutouts or perforations
• Stapled paper
• Envelopes with windows, metal clasps, side seams, or adhesives with release strips
• Padded envelopes
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 195
Paper and Media
To Next Page
Loading...
Need help?
General
