Xerox AltaLink B8145 Series User Manual

3. Stack the paper against the left-rear corner of the tray.
• Insert letterhead and pre-printed paper face down with the top edge toward the front of the tray.
• Load hole-punched paper with the holes to the left.
Note: Do not load the paper above the maximum fill line. Overfilling the tray can cause paper jams.
4. Slide the tray back into the printer.
5. At the control panel, select the correct paper type and color.
• If letterhead paper is loaded in the printer, for type, select LLeetttteerrhheeaadd.
• If pre-printed paper is loaded in the printer, for type, select PPrree--pprriinntteedd.
6. To confirm the settings, touch CCoonnffiirrmm.
LOADING PAPER IN THE BYPASS TRAY
The Bypass Tray supports the widest variety of media types. The tray is intended primarily for small-quantity jobs
that use special media.
To load paper in the Bypass Tray:
212
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Paper and Media

Xerox AltaLink B8145 Series Specifications

General

Print Speed	Up to 45 ppm
Print Resolution	Up to 1200 x 2400 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Duplex Printing	Automatic
Touchscreen	10.1-inch color touchscreen
Functions	Print, Copy, Scan, Fax, Email
Memory	4 GB
Copy Speed	Up to 45 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB
Scanning	Color scanning
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria, Xerox Mobile Link App
Hard Drive	320 GB (optional)