5. Lift the used transfer roller out of the printer.
Note: Do not touch any toner that adheres to the transfer roller.
6. Place the used transfer roller in the plastic bag.
7. Place the new transfer roller in the printer as shown. Press down until the transfer roller clicks into place.
8. Remove the protective cover from the transfer roller, then close Door A.
STAPLE CARTRIDGES AND STAPLE REFILLS
When a staple cartridge is empty, a message appears on the control panel.
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 263
Maintenance
To Next Page
Loading...
