Xerox AltaLink B8145 Series User Manual

General Troubleshooting
This section contains procedures to help you locate and resolve problems. Resolve some problems by simply
restarting the printer.
RESTARTING THE PRINTER
The printer has two power switches. The main power switch, located behind the front door, controls the main power
to the printer. The secondary power switch is the Power/Wake button on the control panel. The Power/Wake button
controls power to the printer electronic components, and when powered off, initiates a software-controlled
shutdown. The preferred method to power on and off the printer is to use the Power/Wake button.
To operate the printer, power on both switches:
1. Power on the main power switch.
2. At the control panel, press the PPoowweerr//WWaakkee button.
3. To restart the printer:
a. At the control panel, press the PPoowweerr//WWaakkee button, then touch RReessttaarrtt. A message appears on the control
panel that warns you that the printer is restarting.
b. If the printer does not restart after several minutes, open the front door, then power off the main power
switch. To restart the printer, power on the main switch, then press the PPoowweerr//WWaakkee button on the control
panel.
c. Close the front door.
If restarting the printer does not resolve the issue, see the table in this chapter that best describes the problem.
282
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Troubleshooting

Xerox AltaLink B8145 Series Specifications

General

Print Speed	Up to 45 ppm
Print Resolution	Up to 1200 x 2400 dpi
Monthly Duty Cycle	Up to 200, 000 pages
Duplex Printing	Automatic
Touchscreen	10.1-inch color touchscreen
Functions	Print, Copy, Scan, Fax, Email
Memory	4 GB
Copy Speed	Up to 45 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	Ethernet, USB
Scanning	Color scanning
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android, Mopria, Xerox Mobile Link App
Hard Drive	320 GB (optional)