c. To lock the waste toner transport unit, rotate the locking lever 45 degrees clockwise.
13. Close the printer front door.
14. Dispose of the protective shield and tape as normal office waste.
REPLACING THE TRANSFER BELT CLEANER
When it is time to replace the transfer belt cleaner, a message appears on the control panel.
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
256
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Maintenance
To Next Page
Loading...
