6. Close the printer front cover.
WASTE CONTAINER
Replacing the Waste Container
When it is time to replace the waste container, a message appears on the control panel.
When you replace the waste container, clean the printhead lens. For details, refer to Cleaning the Printhead Lens.
CCaauuttiioonn:: Spread paper on the floor to catch possible toner spills.
WWaarrnniinngg:: If you spill any toner in the printer, wipe it up using a moist cloth. Never use a vacuum cleaner
to remove spilled toner. Sparks inside the vacuum cleaner can cause a fire or explosion.
WWaarrnniinngg:: If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool water, not hot, to rinse off the toner. If toner gets on your skin,
wash it off with cool water and a mild soap. If you get toner in your eyes, wash it out immediately with
cool water and consult a doctor.
Note: Each waste container includes installation instructions.
To replace the waste container:
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 247
Maintenance
To Next Page
Loading...
