1. Open the Bypass Tray. If the tray is loaded with paper, remove any paper that is a different size or type.
Note: For larger paper sizes, pull out the extension tray.
2. Move the width guides to the edges of the tray.
3. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface. The
procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to use it.
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 213
Paper and Media
To Next Page
Loading...
