5. Load the paper against the right side of the tray.
• Place letterhead or pre-printed paper face up with the top edge toward the front of the tray.
• Place hole-punched paper with the holes toward the right side of the tray.
Note: Do not load paper above the maximum fill line. Overfilling can cause paper jams.
6. Close the side gate, then close Tray 6.
7. At the control panel, select the correct type and color.
• If letterhead paper is loaded in the printer, for type, select LLeetttteerrhheeaadd.
• If pre-printed paper is loaded in the printer, for type, select PPrree--pprriinntteedd.
8. To confirm the settings, touch CCoonnffiirrmm.
216
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Paper and Media
To Next Page
Loading...
