Xerox AltaLink B8145 Series - Page 265

5. Insert the front side of the new staple pack into the staple cartridge, then push the rear side into the cartridge.
6. Grasp the new staple cartridge by the orange handle, then insert the cartridge into the stapler until it clicks.
7. Close the finisher front door.
Replacing Staples in the Office Finisher
Replacing Staples in the Main Stapler of the Office Finisher
CCaauuttiioonn:: Do not perform this procedure when the printer is copying or printing.
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide 265
Maintenance