2. Remove the jammed paper.
Note: If the paper is torn, remove all torn pieces of the jammed paper from the finisher.
3. Close the top cover of the finisher.
Clearing Jams in the Office Finisher Transport
1. To open the transport cover, lift the handle of the center tray straight up.
2. Remove the jammed paper.
Note: If the paper is torn, remove all torn pieces of the jammed paper from the finisher.
3. Close the transport cover.
310
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
