2. Move lever 3c to the left.
3. Carefully remove the jammed paper.
Note:
• If the paper is torn, remove all torn pieces of paper from the finisher.
• If the paper is inaccessible, or if the control panel prompts you, to release the jammed paper, rotate
knob 3b in the direction shown.
4. Return lever 3c to the original position.
5. Close the front door of the Business Ready finisher.
314
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
