3. To remove the paper, pull the paper in the direction shown.
Note: If the paper is torn, remove all torn pieces of the jammed paper from the finisher.
4. Close the front door of the Business Ready Finisher.
Clearing Jams in the Tri-Fold Module
Clearing Jams at Area 2a in the Tri-Fold Module
1. Open the front door of the tri-fold module.
2. Lift handle 2a, then carefully remove the jammed paper.
Note: If the paper is torn, remove all torn pieces of paper from the folder.
318 Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Troubleshooting
To Next Page
Loading...
