Xerox D95 User Manual

Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Carefully remove all sheets and paper scraps from jam clearance areas.
• Close the HCS front door.
049-211
Cause: HCS front door sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
• Open the HCS front door.
• Carefully remove all sheets and paper scraps from jam clearance areas.
• Close the HCS front door.
049-212
Cause: Stacker up/down failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-213
Cause: Stacker up/down failure
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-214
Cause: Stacker cart sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-215
Cause: Stacker cart sensor fault
Remedy: Perform the following:
20-13Xerox
®
D95/D110/D125/D136 Copier/Printer
User Guide
High Capacity Stacker (HCS)

Xerox D95 Specifications

General

Print Speed	Up to 95 ppm
Print Resolution	2400 x 2400 dpi
First-Print-Out Time	As fast as 3.5 seconds
Duplex Printing	Yes
Standard Paper Size	A4
Max Paper Size	13 x 19 in.
Connectivity	Ethernet, USB
Finishing Options	Stapling, Hole Punching, Folding
Warranty	1 year