Xerox D95 User Manual

Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-216
Cause: Stacker cart sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-217
Cause: Stacker full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-218
Cause: Stacker full sensor fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-219
Cause: HCS front door fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-220
Cause: Stacker upper/lower limit fault
Remedy: Perform the following:
Power Off/On the machine
If the problem still exists, contact the Customer Support Center.
049-221
Cause: Stacker upper/lower limit fault
Remedy: Perform the following:
Power Off/On the machine
User Guide20-14
High Capacity Stacker (HCS)

Xerox D95 Specifications

General

Print Speed	Up to 95 ppm
Print Resolution	2400 x 2400 dpi
First-Print-Out Time	As fast as 3.5 seconds
Duplex Printing	Yes
Standard Paper Size	A4
Max Paper Size	13 x 19 in.
Connectivity	Ethernet, USB
Finishing Options	Stapling, Hole Punching, Folding
Warranty	1 year