6.1 Clearing Paper Jams 105
2. Lift up the green levers on both sides of the
fuser unit and remove the jammed paper.
If any jammed paper cannot be found, go
on to the next step.
3. Hold the fuser cover by the part shown in
the figure and open the cover. Then,
remove the jammed paper.
4. Place the green levers on both sides of the
fuser unit to their original positions.
5. Close the front cover.
Important
• When closing the front cover, be careful not to get your
fingers caught between (the left, right, top, or bottom
edge of) the cover and the printer.
To Next Page
Loading...
