80 4 Paper
Setting the Paper Type of the Tray 1
Use the following procedure when setting the paper type of the tray 1.
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Tray Settings]
is displayed.
3. Press the < > or <Eject/Set> button to
accept the selection.
[Tray 1] is displayed.
4. Press the < > or <Eject/Set> button to
accept the selection.
[Paper Type] is displayed.
5. Press the < > or <Eject/Set> button to
accept the selection.
The current setting is displayed.
6. Press the < > button until the correct
paper type is displayed for the loaded
paper.
(Example: Heavyweight 1)
7. Press the <Eject/Set> button to confirm
your selection.
8. Press the <Menu> button to return to the
print screen.
To Next Page
Loading...
