5.2 Setting the Common Menus 103
[SMB]
Set this when using the SMB port.
Note
• [SMB] appears only when the network expansion card (optional) is installed.
Network / Port
SMB
SMB
Port Status
Port Status
SMB TCP/IP
Port Status
SMB NetBEUI
SMB
Print Mode
Setting Item Description
Port Status Sets whether to enable or disable the SMB port at printer start-up.
If you selected [Enable], select also TCP/IP or NetBEUI.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Print Mode Sets the method of processing data (print language).
• [Auto] (default)
After receiving data from a computer, the printer automatically detects its
print language and processes the data accordingly. (See *1 on P. 131.)
• [ESC/P], [PDF], [PS], [PCL]
After receiving data from a computer, the printer processes the data with the
selected print language.
•[HexDump]
Allows you to view data received from a computer by printing it in ASCII
codes (hexadecimal format). (See *3 on P. 131.)
Note
• On the DocuPrint C3055, [PS] appears only when the PostScript software kit
(optional) is installed.
To Next Page
Loading...
Need help?
General