5.2 Setting the Common Menus 107
[E-mail Printing]
Set whether to use the E-mail Printing feature.
[SNMP Settings]
Set this when using the SNMP port. SNMP must be used when managing multiple printers
remotely with an application. SNMP manages printer information and provides it to the
application.
Network / Port
E-mail Printing
E-mail Printing
Port Status
Setting Item Description
E-mail Printing Sets whether to enable or disable the E-mail port at printer start-up.
• [Enable] (default)
• [Disable]
Note
• After changing this setting, reboot the printer.
Network / Port
SNMP Settings
SNMP Settings
Port Status
Port Status
SNMP UDP
Port Status
SNMP IPX
Setting Item Description
Port Status Sets whether to enable or disable the SNMP port at printer start-up.
If you selected [Enable], select also UDP or IPX.
• [Enable] (default)
• [Disable]
Note
• When using UDP protocol, both the printer and client computers must have
IP addresses.
• [SNMP IPX] appears only when the network expansion card (optional) is
installed.
• To determine which protocol (UDP or IPX) to use, refer to the manual
supplied for the application.
• After changing this setting, reboot the printer.
To Next Page
Loading...
Need help?
General