4.2 Loading Paper 87
Setting the Paper Sizes of the Trays 1 - 4
Use the following procedure when setting non-standard paper sizes for the trays 1 - 4.
Note
• If you changed the paper loaded in a tray from standard-size paper to non-standard-size paper, select
[Auto] in Step 8. The printer will automatically detect the orientation of the paper.
• To print on non-standard size paper, set the paper size also on your print driver. For more information,
refer to "Loading Non-standard Size Paper" (P. 51).
1. Press the <Menu> button on the control
panel to display the menu screen.
2. Press the < > button until [Admin Menu] is
displayed.
3. Press the < > button to accept the
selection.
[Network/Port] is displayed.
4. Press the < > button until [Printer
Settings] is displayed.
5. Press the < > button to accept the
selection.
[Substitute Tray] is displayed.
6. Press the < > button until [Paper Size] is
displayed.
7. Press the < > button to accept the
selection.
[Tray 1] is displayed.
8. Press the < > button until the desired tray
is displayed. Press the < > button to move
to the right field and then press the < >
button.
[Tray 1 Custom] is displayed.
9. Press the <Eject/Set> button to confirm
your selection.
[Portrait (Y)] is displayed.
10. Press the < > button to select [Portrait
(Y)].
The current setting is displayed.
11. Enter the length using the < > or < >
button. (Example: 431 mm)
Menu
Print Language
Menu
Admin Menu
Admin Menu
Network / Port
Admin Menu
Printer Settings
Printer Settings
Substitute Tray
Printer Settings
Paper Size
Paper Size
Tray 1 Auto*
Paper Size
Tray 1 Custom
Tray 1 Custom
Portrait (Y)
Portrait (Y)
148mm*
Portrait (Y)
431mm
To Next Page
Loading...
Need help?
General