130 5 Control Panel Menus
[Init/Del Data]
The [Init/Del Data] menu allows you to initialize the settings stored in the NV memory,
network ports, and hard disk, and delete data such as forms registered on the printer.
Note
• Executing initialization returns the settings to their default values.
Admin Menu
Init/Del Data
Init/Del Data
Initialize NVM
Init/Del Data
Init/NetworkPort
Init/Del Data
Hard Disk
Init/Del Data
Delete Form
Setting Item Description
Initialize NVM Initializes the NV memory. All settings return to the defaults.
Note
• The NV memory is nonvolatile memory that retains the settings of the printer
even when its power is switched off.
• After changing this setting, reboot the printer.
Init/Network Port Initializes the network/port settings (P. 99).
Note
• After changing this setting, reboot the printer.
Hard Disk Initializes the hard disk.
Note
• After changing this setting, reboot the printer.
• [Hard Disk] appears only when the hard disk (optional) is installed.
Delete Form Deletes the ESC/P forms registered on the printer.
• [Delete ESCP Form]
Note
• [Not registered] is displayed if no form is registered.
To Next Page
Loading...
Need help?
General