84 4 Paper
3. Extend (or unextend) the tray until the lock
released in Step 2 is locked automatically.
(Example: The tray is extended.)
4. Pinch the guide clip on the left side of the
tray and slide it to the size of the paper.
(Example: A4 landscape)
5. Pinch the rear guide clip and slide it to the
size of the paper.
Align the mark of the paper size with
the mark on the guide.
6. Load the paper with the print side facing up.
Note
• Do not fill paper above the maximum fill-line. Doing so
can cause paper jams.
7. Place the appropriate paper size label on
the tray.
To Next Page
Loading...
Need help?
General