Xerox Versant 80 Press - 6 Setup and Calibration (Tools Administrator Mode); Setup & Calibration Overview; Setup & Calibration Procedure

6
Setup and Calibration
(Tools Administrator Mode)
Setup & Calibration Overview
Use Setup & Calibration to configure and manage the following features:
• Setup: Configure and manage features and options for various services such as job
flow worksheets and creating folders to store various scan and email jobs.
• Calibration: Calibrating the press for copy and scan jobs.
• Clean Fuser Assembly: Run the procedure to clean the fuser assembly.
Setup & Calibration Procedure
1. Login as the Administrator.
2. Press the Machine Status button on the press User Interface.
3. Select the Tools tab on the UI.
4. Select Setup & Calibration.
5. Select a Group and Feature.
6. Set or change the feature options, as desired.
7. Select Save.
8. Exit the System Administration Mode.
6-1Xerox
®
Versant
®
80 Press
System Administration Guide