2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Image Quality Adjustment.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Reports
Reports Overview
Use this feature to set the options which affect printable reports; options include:
Print Reports Button
When enabled, the Print Reports button appears on the Machine Information tab. No
system administator login ID is required for printing the reports.
Job History Report
Select Print Report to automatically print a Job History Report after a total of fifty
jobs is processed.
Scan File Transfer Report
Select whether or not to print the report for data transmission results when the scanned
data is transferred to a computer on the network or is sent via e-mail. You can select
Off, On, or Print When Delivery Fails.
2 Sided Report
When printing a report, select whether to print a 1-sided or 2-sided report.
Job Flow Error Report
Select whether or not to automatically print a Job Flow Error Report. Select On or Off.
Setting the Reports Options
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Reports.
Xerox
®
Versant
®
80 Press4-12
System Administration Guide
System Settings (Tools Administrator Mode)
To Next Page
Loading...
