Xerox Versant 80 Press - Essential Tools Procedures; Tools Menu Lists; Main Tools Menu; System Settings Menu List

Essential Tools Procedures
The following is a list of some of the essential Tools procedures:
• For Finisher Adjustment > Adjust Fold Position , refer to Adjust Fold Position
• For Finisher Adjustment > DFA Finisher Profiles , refer to Using DFA Finisher Profiles
• For correcting / adjusting the paper curl, refer to Adjust Paper Curl
• For HFSI counters, refer to Resetting a High Frequency Service Item (HFSI) Counter
• For Auto Alignment, Density Uniformity, and Image Transfer, refer to the Simple
Image Quality Adjustment (SIQA) section of this guide
• Calibrating the Press for Copy and Scan Jobs
• Cleaning the Fuser Assembly
Tools Menu Lists
Main Tools Menu
The press has many factory default settings which can be customized. The following
tables provide a quick reference of the various features and options that can be set or
changed while logged in as administrator. The features/options may vary depending
on the press configuration and any optional hardware or software installed.
System Settings
Setup & Calibration
Accounting
Authentication / Security Settings
Tools
System Settings Menu List
Common Service Settings
Copy Service Settings
Connectivity & Network Setup
Scan Service Settings
E-mail Service Settings
Address Book Settings
Folder Service Settings
Job Flow Service Settings
Stored File Settings
System Settings
Xerox
®
Versant
®
80 Press3-2
System Administration Guide
Tools (Administrator Mode)