Selecting the Preset Buttons
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Copy Service Settings .
5. Select Preset Buttons.
6. Select the item to be set.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.
Copy Defaults
Copy Defaults Overview
Use this feature to select the default settings for the various copy features. Selections
made here are displayed on the Copy screen. When the power is switched on, when the
machine exits the power saving mode, or when the Clear All button is pressed, these
default settings are displayed. By assigning default values to commonly used features,
you reduce the number of selections when choosing features for the copy process. Copy
Defaults settings can be made for the following options:
• Paper Supply
• Reduce/Enlarge
• Output Color
• Original Type
• Lighten/Darken
• Sharpness
• Background Suppression
• 2 Sided Copying
• Mixed Size Originals
• Edge Erase: Top Edge, Bottom Edge, Left Edge, Right Edge, Center Erase/Binding
Edge Erase, and 2 Sided Original - Side
• Image Shift: Side 1 and Side 2
• Image Rotation and Image Rotation - Rotation Direction
• Original Orientation
• Pages per Side
• Copy Output
4-41Xerox
®
Versant
®
80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
To Next Page
Loading...
