The adjustment profile is then complete and can be selected by users for print runs, as
needed.
Auto Alignment Adjustment
Auto Alignment Adjustment Overview
The Auto Alignment procedure generates an individual alignment profile for each
stock/tray combination selected when performing the procedure. These profiles ensure
that images are placed correctly on the media. You can create up to 50 profiles. Each
created profile will then be automatically used each time the associated stock is used,
ensuring optimal print quality.
Printing the SIQA Targets
1. If not done already, you will need to print a pattern that is used during this procedure.
Print the PDF file called Black Background Sheet which is located on www.xerox.com
under the Versant 80 Press Documentation.
The Black Background sheet is needed when creating profiles for media over 220gsm
and/or larger than 11x17/A3.
2. Print the file duplex on either 11x17 or A3 media depending on your region.
The weight (gsm) is not important, but a higher gsm will result in a longer sheet life.
Once it is printed, you can re-use it and do not have to print it again until it gets worn
down with use.
3. At the Press UI, select the Login/Logout button.
4. Log-in as a System Administrator by typing admin as the ID (password).
5. Select the Machine Status button on the UI.
6. Select the Tools tab.
7. On the Features column, select the down arrow to scroll to the next page.
8. Select Maintenance.
Xerox
®
Versant
®
80 Press5-2
System Administration Guide
Simple Image Quality Adjustment (SIQA)
To Next Page
Loading...
