Xerox Versant 80 Press - Basic Connectivity & Network Setup Procedure; Selecting the Remote Authentication Server Settings

Basic Connectivity & Network Setup Procedure
1. Login as the Administrator.
2. Press the Machine Status button on the UI control panel.
3. Select the Tools tab on the UI.
4. Select System Settings.
5. Select Connectivity & Network Setup.
6. Select the feature to be set or changed.
• Port Settings
• Protocol Settings
• Device's E-mail Address / Host Name
• Proxy Server Settings
• Remote Authentication Server Settings
• Security Settings
• Other Settings
7. Select the item to be set or changed.
8. Select Change Settings.
9. Select the desired setting for the option.
10. Select Save.
11. Select another item to set or change and repeat the previous steps as needed.
12. Select Close.
The main Tools screen displays.
13. Exit the administrator mode.
Selecting the Remote Authentication Server Settings
1. Login as the Administrator.
2. Press the Machine Status button on the UI control panel.
3. Select the Tools tab on the UI.
4. Select System Settings.
5. Select Connectivity & Network Setup.
6. Select Remote Authentication Server Settings.
7. Select Authentication System.
8. Select Setup.
9. Select Change Settings.
10. Select one of the following:
• Kerberos Server Settings; go to the Step 11.
• SMB Server Settings; go to Step 12.
11. For Kerberos Server Settings, perform the following:
a) Select a Kerberos Server.
b) Select Change Settings.
Xerox
®
Versant
®
80 Press4-50
System Administration Guide
System Settings (Tools Administrator Mode)