Xerox Versant 80 Press - Page 125

• Name/E-mail Address: Displays the recipient name or e-mail address specified.
• Subject: If desired, set a specific subject.
• Delete Recipient: Deletes all the information for the selected recipient.
• Edit: Allows you to check or change the information for the selected recipient.
• File Format: Specify the output file format.
• Resend Attempts: Set the amount of times you want to resend an E-mail or to switch
off the feature. If you select On, set the number of resend attempts and time interval:
- Resend Attempts: Set the number of times to resend an email between 1-5.
- Resend Interval: Set the transmission retry interval from 30-300 seconds.
Transfer via FTP (1) / Transfer via FTP (2) Options
The additional settings available with the Transfer via FTP (1) / Transfer via FTP (2)
option include the following:
• Address Book
• File Format
• Resend Attempts
• Name, Server, Save, User Name, and Password: The maximum number of characters
for each item is:
- Name: Maximum 18 single-byte characters
- Server: Maximum 64 single-byte characters
- Save in: Maximum 128 single-byte characters
- User Name: Maximum 97 single-byte characters
- Password: Maximum 32 single-byte characters
Transfer via SMB (1) / Transfer via SMB (2) Options
The additional settings available with the Transfer via SMB (1) / Transfer via SMB (2)
option include the following:
• Address Book
• File Format
• Resend Attempts
• Name, Server, Save, User Name, and Password: The maximum number of characters
for each item is:
- Name: Maximum 18 single-byte characters
- Server: Maximum 64 single-byte characters
- Save in: Maximum 128 single-byte characters
- User Name: Maximum 97 single-byte characters
- Password: Maximum 32 single-byte characters
6-13Xerox
®
Versant
®
80 Press
System Administration Guide
Setup and Calibration (Tools Administrator Mode)