Xerox Versant 80 Press - Page 65

Paper Size Settings
Specify the size of paper to be automatically detected when you use standard sizes
for a document or the machine is set to detect sizes of a document. Select one of the
following options:
• A/B Series (8 × 13 in.)
• A/B Series
• A/B Series (8K/16K)
• A/B Series (8 × 13 in./8 × 14 in.)
• Inch Series
Millimeters/Inches
Select the unit of measurement that will be displayed on the screen; select either
Millimeters or Inches.
Keyboard Input Restriction
Select whether or not to restrict the display of the virtual keyboard on the machine UI.
To prevent characters from being garbled when switching character sets, you can limit
input to ASCII characters. If you select On (ASCII Only), the keyboard displayed shows
ASCII characters only.
Operation of Up/Down Buttons
Select whether or not to enable continuous scrolling when pressing the scroll buttons.
Display of Consumables Screen
Select whether or not to display the consumables status when a replacement is required;
options include:
• Off: Does not display the consumables status screen.
• When power is switched on: Displays the consumables status screen at startup.
• When Auto Clear is activated: Displays the consumables status screen when Auto
Clear is executed.
Data Encryption
If you want the recorded data on the hard disk encrypted, select On as the default
setting for this feature. By switching on the data encryption, all data written to the
hard disk is automatically encrypted. Encryption prevents unauthorized access to the
stored data.When encryption is on, an encryption key must be set.
Note
This is an optional feature that may not be available on your machine; it is part of the
optional Data Security Kit. For more information, contact the Customer Support Center.
Refer to Setting the Data Encryption Options.
4-35Xerox
®
Versant
®
80 Press
System Administration Guide
System Settings (Tools Administrator Mode)