Xerox WorkCentre 3025BI User Manual

Copy Procedure
Xerox® WorkCentre® 3025
User Guide
94
Copy Procedure
This section describes the basic procedure for making copies:
•Load Documents
• Select the Features
• Enter the Quantity
•Start the Job
• Stop the Copy Job
If an authentication feature is enabled, you may need an account before using the machine. To get an
account, or for more information, contact your System Administrator.
Note: Some options may be unavailable depending on your machine configuration.
Load Documents
Documents can be loaded either into the automatic document feeder or onto the platen glass.
Note: Some options may be unavailable depending on your machine configuration.
Automatic Document Feeder
The automatic document feeder can hold a maximum of 40 originals of 20 lb (80 g/m²) thickness.
1. Load documents to be scanned face up in the input tray
of the automatic document feeder with the top of the
document to the left of the tray.
2. Move the document guide to just touch both sides of the
document.

Xerox WorkCentre 3025BI Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Memory	128 MB
Duplex Printing	Manual
First Page Out	As fast as 8.5 seconds
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Paper Capacity	150 sheets
Processor Speed	600 MHz
Dimensions	406 x 360 x 257 mm
Weight	7.5 kg
Scan Resolution	600 x 600 dpi
Maximum Document Size	216 x 356 mm
Connectivity	USB, Wi-Fi
Print Resolution	Up to 1200 x 1200 dpi enhanced image quality
Duty Cycle	Up to 15, 000 pages