Xerox WorkCentre 3025BI User Manual

Software Update
Xerox
® WorkCentre® 3025
User Guide
178
Software Update
Xerox is continually seeking to improve its products. A software revision may become available to
improve the functionality of your machine. The Software Upgrade feature allows the customer to
upgrade the machine software without needing a Customer Service Representative to be present.
The Software Upgrade Process
The software can be upgraded over a network connection using CentreWare Internet Services.
• Any jobs in the printer queue must be allowed to complete or be deleted before initiating a
software upgrade.
• This procedure will prevent further jobs from being received until the upgrade has completed.
• All configured network settings and installed options will be retained by the machine after the
Software Upgrade process.
Process Checklist
Before starting ensure that the following items are available and/or the tasks have been performed:
• Obtain the new software upgrade file for your machine from the www.xerox.com
web site or from
your Xerox Customer Support Representative. The upgrade file will have an extension of .hd.
Download the upgrade file to a local or network drive. You will be able to delete the file after the
upgrade procedure.
• It is important to obtain the correct upgrade file for your particular model of machine. For
instructions to determine which model of machine you have, refer to Installation and Setup.
• TCP/IP and HTTP protocols must be enabled on the machine so that the machine web browser
can be accessed.
Procedure
Note: The upgrade should take less than 10 minutes unless there are network issues.
1. At your workstation, open the web browser and enter the IP Address of the machine in the
Address Bar.
2. Press Enter.
3. Select the Login link at the top of the screen. Enter the Administrator User Name (admin) and
Password (1111), and select Login.
4. Select Properties.
5. In the Security link on the left hand side select the System Security link.
6. Select the Feature Management link in the directory tree.
7. Select the Firmware Upgrade Enable box.
8. Click Apply to save the changes.
9. Select the Support tab.
10. In the Firmware Upgrade link select the Upgrade Wizard button.

Xerox WorkCentre 3025BI Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	Up to 20 ppm
Copy Speed	Up to 20 cpm
Copy Resolution	Up to 600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Memory	128 MB
Duplex Printing	Manual
First Page Out	As fast as 8.5 seconds
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Paper Capacity	150 sheets
Processor Speed	600 MHz
Dimensions	406 x 360 x 257 mm
Weight	7.5 kg
Scan Resolution	600 x 600 dpi
Maximum Document Size	216 x 356 mm
Connectivity	USB, Wi-Fi
Print Resolution	Up to 1200 x 1200 dpi enhanced image quality
Duty Cycle	Up to 15, 000 pages